Product Code
Product description
Product Picture
Info
Product Position
EAVES FLOW TO VENTILATION UNIT ETV001
locates in the eaves beam between the glazing bars allowing the glass to seat flat
ALUMINIUM EAVES BEAM
runs the front length or the roof and attaches to the firring frame end closure
EAVES INNER LOWER TRIM
locates on the inner face, lower lip of the eaves beam
EXTERNAL THERMAL CLADDING
locates/clips to the Eaves beam as an external cover
ALUMINIUM EAVES BEAM TO EAVES BEAM SLEEVE JOINTER
Used to join eaves beam aluminium section over a curtain length
FIRRING MAIN BODY
Locates on top of the firring frame connector and capped off with the firring cover trim
FIRRING FRAME CONNECTOR
Connects the eaves beam section to the house wall (in effect a plastic eaves beam) and has the firring sections on top
FIRRING POLY SUPPORT
Sits on top of the firring cover trim
FIRRING COVER TRIM
locates between firring main body and the firring poly support trim
ALUMINIUM REINFORCEMENT
Aluminium box section that slides inside the firring frame connector for structural support
STEEL REINFORCEMENT
Steel section that slides inside the aluminium reinforcement beam for extra structural support
M6 x 20 Hex Head Bolt
This bolt is required for the eaves beam only. Bolts used everywhere else (I.E. the ridge) are standard classic bolts